Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
60
7 PROGRAMMING EQ
7.1 Parametric Equalisation (PEQ)
To switch to an input channel’s Parametric Equalisation (PEQ) view
Click
(PEQ) on the input channel’s control panel.
The graph shows the combined EQ (black) and the response of the selected PEQ section (red). There
are 12 input channel PEQ sections, which provide adjustment for frequency, bandwidth (Q) and level.
PEQ sections can also be adjusted directly on the graph by using the target cursor.
Target cursor: adjust
frequency and level of selected
PEQ section by dragging the
target curso
r
Black graph:
shows combined
EQ
Reset:
Right click to reset the values
of an individual input filter.
Input channel
selection buttons
Red graph: shows the response
of the selected PEQ section
Reset All:
Right click to reset the
values of all input filters.
Input Channel:
Left click to select
an input channel
set-up section