Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
66
To copy a unit’s output channel to output channels of selected units
1 Click and then, if necessary, , to obtain the Copy Output
Channels screen.
2 Click in the Source Unit field and select the unit
you wish to copy the output channel from, using
the drop down list. For example, “02 KLARK
TEKNIK DN9848 E”.
3 Click in the Source Channel field and select
the output channel of the source unit that
you wish to copy, using the drop down list.
For example, “Output 6”.
4 From the Copy Options section, select the elements of the channel
you wish to copy by clicking in the circle next to your required
option. For example, Whole Channel in the diagram right.
5 Under Destination Unit(s):, select the
unit(s) that you wish to copy the
output channel to by placing a tick
in adjacent box. For example, “08
KLARK TEKNIK DN9848 E”. To
select all units, click on
. To deselect all selected units, click on .
6 Under Destination Channel(s), select the output channel(s) that you wish
to copy the selection to. For example, “Output 5”. To select all
channels, click on
. To deselect all selected channels,
click on
.
7 When you are satisfied that your selections are correct, click .