Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
75
7 Tick the boxes of the input channels you wish to group
together.
8 Click . A form pops up that
allows you to copy data from one
channel to another (using the same
set of options as the Copy Channels
pages earlier in this document).
Depending on the type of group,
various options will be allowed as to
what sections you are able to copy.
If the group contains a PEQ section,
this will be selected and greyed out
and will always be copied. This
action is taken because the PEQ
section contains absolute parameters
which MUST be the same value.
9 You can now change the name of your input group to make it more easily identifiable and
also edit the gain and delay, protection and PEQ settings, dependent on the elements you
selected in step 4. These are detailed in the following sections.
To change the name of an input group
1 Click in the current input group’s name field and
follow instructions detailed in section 3.2.5. The
input group’s panel will be updated with the new
name in FastNav
®
.