Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
84
11.3.2 Ethernet connection – wireless option
The system set up for the wireless option Ethernet connection is via an Ethernet cable. One end is
connected to the network socket of the wireless access point. The other end is connected to either an
Ethernet socket on one of the HELIX DN9848E units (daisy chain), or an Ethernet switch or hub,
depending on system configuration. This system is operated remotely from a tablet or laptop PC.
11.3.3 Configuring the Network Devices
Before setting up the Ethernet system for operational purposes, you must first configure the system
devices, that is, the laptop/PC and HELIX DN9848E units to communicate with each other using TCP/IP
protocol. This is done by assigning them unique IP addresses on a shared system.
For a description of the Communications option in ELGAR’s System Configuration window and details on adding,
assigning, configuring and editing ports, saving configurations to a file etc., refer to the ELGAR Library
Manager User Guide. However, any HELIX DN9848E RCS-specific information is detailed in
section 11.5.
To configure an Ethernet device and assign a port to it
1 From the ELGAR menu, select Tools > Options.