Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
102
To connect Ethernet and non-Ethernet units in an Ethernet/serial system
The PC is connected to the first Ethernet unit using one of the options in Section 11.3. The Ethernet
units are connected together using one of the options in Section 11.2. The last Ethernet unit is
connected to a Lantronix UDS1100 Ethernet-to-serial converter via an Ethernet cable. The Lantronix
converter is then connected to the first non-Ethernet unit via serial RS-485 cabling. All of the non-
Ethernet units are connected together in a daisy-chain configuration using RS-485 cabling.
To set up the Lantronix UDS1100 converter, see Section 12.3.