Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
79
7 Tick the boxes of the output channels you wish to
group together.
8 Click . A form pops up that
allows you to copy data from one
channel to another (using the same
set of options as the Copy Channels
pages earlier in this document).
Depending on the type of group,
various options will be allowed as to
what sections you are able to copy.
If the group contains a PEQ or Filter
section, this will be selected and
greyed out and will always be
copied. This action is taken because
the sections contain absolute
parameters which MUST be the
same value.
9 You can now change the name of your output group to make it more easily identifiable and
also edit the gain and delay, filters, PEQ and Dyn. settings, dependent on the elements you
selected in step 4. These are detailed in the following sections.
To change the name of an output group
1 Click in the current output group’s name field and
follow the instructions detailed in section 3.2.5. The
output group’s panel will be updated with the new
name in FastNav
®
.