Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
77
To add channels to an existing input group
1 Select the input group that you wish to add the channels to by clicking on its panel below
the Input Groups button in FastNav
®
, for example, .
2 In the left-hand section of the screen, tick the input channels that you wish to add to the
input group.
3 Click . A form pops up that
allows you to copy data from one
channel to another (using the same
set of options as the Copy Channels
pages earlier in this document).
Depending on the type of group,
various options will be allowed as to
what sections you are able to copy.
If the group contains a PEQ section,
this will be selected and greyed out
and will always be copied. This
action is taken because the PEQ
section contains absolute
parameters which MUST be the
same value.
This gives the option of choosing
one of the channels already in the list
to be master and its data copied to
the channels about to be added.
To remove channels from an input group
1 Select the input group that you wish to remove the channels from by clicking on its panel
below the Input Groups button in FastNav
®
, for example, .
2 In the right-hand section of the screen, tick the input channels that you wish to remove
from the input group.
3 Click . The selected input channels are transferred to the left-hand section and
removed from the input group.
To jump to the currently selected unit on the DN9848 Units Home screen
You can jump to the DN9848 Units Home screen, which will display the currently selected unit,
by clicking
.
To delete an input group
1 Select the input group that you wish to delete by clicking on its panel below the Input Groups
button in FastNav
®
, for example, .
2 Click .
3 Click Yes at the Remove Group window. Both the left- and right-hand sections and the input
group name field will empty and the input group’s panel will disappear from FastNav
®
. The
screen will change to that shown in section 3.4.4.