Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
33
To change a unit’s Panel Lock Password
To be able to change Panel Lock Password the HELIX DN9848E RCS must first be online.
1 In the Unit Locking window, click on Change Password in the
Panel Locks section.
2 Type in a password of up to 12 characters in length,
which includes spaces.
3 Repeat the password in the lower field to confirm it and
click OK.
Provided the passwords in both fields match, HELIX DN9848E RCS
will confirm the change. If there was a mismatch, the change will
fail.
3.6.2 System Protect
Selecting Off in the System Protect panel locks out all output parameters (except mutes) and system
memories but allows user memories to be recalled and stored and inputs to be edited.
To access a unit’s system protect panel
1 Make sure you are at the DN9848 Units Home screen and selected unit is online, then click on
.
2 Type in the System Protect Password to activate the System Protect panel.
3 Select On or Off, as required, in the System Protect panel.
4 Click OK.
To change a unit’s System Protect Password
To be able to change System Protect Password the HELIX DN9848E RCS must first be online.
1 In the Unit Locking window, click on Change Password in the
System Protect panel.
2 Type in a password of up to 12 characters in length,
which includes spaces.
3 Repeat the password in the lower field to confirm it and
click OK.
Provided the passwords in both fields match, Helix RCS will confirm
the change. If there was a mismatch, the change will fail.