Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
8
2.2 Software Installation
HELIX DN9848E RCS Add-In is provided as an ‘.exe’ file from the Klark Teknik website
(www.klarkteknik.com) with an integral Setup Wizard that guides you through the installation process
on your laptop/PC.
Note
We recommend that you save the .exe file to your desktop - or other holding folder - rather
than opening the file while the Internet transfer is in progress. This will avoid the possibility of
the integral Setup Wizard interrupting the transfer, especially on slower internet connections.
After you have downloaded the .exe file, install it on your laptop/PC as follows:
1 Run the “DN9848ERCS_Vn_nn.exe” file (where “n_nn” is
the latest software version). The Setup Wizard should
appear on-screen within a few seconds.
2 Following the on-screen instructions, click to go
to the Information window, which details the latest
improvements to the software. Previous users may find
this information particularly useful.
3 Click to go to the Select Desination Location window.
Leave the Destination Directory as the preset default, that is,
“C:\Program Files\Klark Teknik Group\ELGAR”, unless you
have installed ELGAR in an alternative directory. In the
latter case, specify your alternative ELGAR destination
directory.
4 Click once again; this will take you to the Ready to
Install window.