Filter
Top Products
Ð 16 Ð
6139AV 2-Way Voice
Keypads
The control supports the VIM Voice Interface Module, which can support up to six
6139AV 2-way voice keypads. These keypads feature a built-in microphone and
speaker that allows a central station operator to "listen-in" and/or speak to persons at
the protected premises after an alarm has occurred. Note that during this Òlisten-inÓ
and/or ÒspeakÓ period, all alarms will be temporarily silenced. Refer to the
2-WAY
VOICE KEYPADS AND AUDIO ALARM VERIFICATION
section later in this manual for
details on wiring and using the VIM module and 6139AV keypads.
6139AV Audio Connection
In addition to the 4-wire connection to the control's keypad terminals, the 6139AV
requires a shielded 2-wire connection to a VIM Voice Interface Module. This
information is provided in the
2-WAY VOICE KEYPADS AND AUDIO ALARM
VERIFICATION
section.
Voice Interface Module
(VIM) Connection
The VIM connects to the control's keypad terminals in the same manner as any other
keypad. The VIM requires a device address to be set using its DIP switches, and
requires programming using the #93 Menu Mode Ð Device Programming. Refer to
the
2-WAY VOICE KEYPADS AND AUDIO ALARM VERIFICATION
section for
connection and programming information.