Filter
Top Products
Operating Instructions Teledyne API Model T360/T360M Operation Manual
94
4.7.3. Remote DAS Configuration
Editing channels, parameters and triggering events as described in this can be
performed via the APICOM remote control program using the graphic interface
shown in Figure 4-5. Refer to Section 4.15 for details on remote access to the
T360 analy
zer.
Figure 4-5: APICOM User Interface for DAS Configuration
Once a DAS configuration is edited (which can be done offline and without
interrupting DAS data collection), it is conveniently uploaded to the instrument
and can be stored on a computer for later review, alteration or documentation and
archival. Refer to the APICOM manual for details on these procedures. The
APICOM user manual (Teledyne Instruments part number 039450000) is
included in the APICOM installation file, which can be downloaded at
http://www.teledyne-api.com/software/apicom/. It is recommended that you start
by downloading the default DAS configuration, getting familiar with its
command structure and syntax conventions, and then altering a copy of the
original file offline before uploading the new configuration.
CAUTION
Whereas the editing, adding and deleting of DAS channels and parameters of one channel
through the front-panel touchscreen can be done without affecting the other channels, uploading
a DAS configuration script to the analyzer through its communication ports will erase all data,
parameters and channels by replacing them with the new DAS configuration. Backup of data and
the original DAS configuration is advised before attempting any DAS changes.
07272B DCN6552