Filter
Top Products
Teledyne API Model T360/T360M Operation Manual Operating Instructions
91
4.7.2.9. RS-232 REPORT FUNCTION
The T360 DAS can automatically report data to the communications ports, where
they can be captured with a terminal emulation program or simply viewed by the
user.
To enable automatic COM port reporting, follow the instruction shown in Section
4.7.2.2 then press:
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 1, 900
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT EXIT
SETUP X.X RS-232 REPORT: OFF
<SET SET> EDIT PRINT EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
SETUP X.X RS-232 REPORT: OFF
OFF ENTR EXIT
Toggle to turn
reporting ON or OFF
Press SET> key until…
From the DATA ACQUISITION menu
(see Section 4.7.2.2)
4.7.2.10. COMPACT REPORT
When enabled, this option avoids unnecessary line breaks on all RS-232 reports.
Instead of reporting each parameter in one channel on a separate line, up to five
parameters are reported in one line.
4.7.2.11. STARTING DATE
This option allows to specify a starting date for any given channel in case the user
wants to start data acquisition only after a certain time and date. If the Starting
Date is in the past, the DAS ignores this setting.
07272B DCN6552