Filter
Top Products
Operating Instructions Teledyne API Model T360/T360M Operation Manual
92
4.7.2.12. DISABLING/ENABLING DATA CHANNELS
Data channels can be temporarily disabled, which can reduce the read/write wear
on the disk-on-chip. The ALL_01 channel of the T360, for example, is disabled
by default.
To disable a data channel, follow the instruction shown in Section 4.7.2.2 then
press:
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 1, 900
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT EXIT
SETUP X.X CHANNEL ENABLE:ON
<SET SET> EDIT PRINT EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
SETUP X.X CHANNEL ENABLE:ON
OFF ENTR EXIT
Toggle to turn
channel ON or OFF
Press SET> key until…
From the DATA ACQUISITION menu
(see Section 4.7.2.2)
07272B DCN6552