Filter
Top Products
Introduction Teledyne API Model T360/T360M Operation Manual
18
1.3. OPTIONS
Option
Option
Number
Description/Notes
Pumps
Pumps meet all typical AC power supply standards while exhibiting same
pneumatic performance.
11 No pump (If one is standard either internal or external)
10A External Pump 100V – 120V/60Hz
10B External Pump 220V – 240V/50H
10C External Pump 220V – 240V/60Hz
10D External Pump 100V – 120V/50Hz
10E External Pump 100V /60Hz
13 High Voltage Internal Pump 240V/50Hz
Rack Mount Kits
Options for mounting the analyzer in standard 19” racks
20A Rack mount brackets with 26 in. (660 mm) chassis slides
20B Rack mount brackets with 24 in. (610 mm) chassis slides
21 Rack mount brackets only (compatible with carrying strap, Option 29)
23 Rack mount for external pump pack (no slides)
Carrying Strap/Handle Side-mounted strap for hand-carrying analyzer
29
Extends from “flat” position to accommodate hand for carrying.
Recesses to 9mm (3/8”) dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
CAUTION – GENERAL SAFETY HAZARD
THE T360 OR T360M ANALYZER WEIGHS ABOUT 18 KG (40 POUNDS).
TO AVOID PERSONAL INJURY WE RECOMMEND THAT TWO PERSONS LIFT AND CARRY
THE ANALYZER. DISCONNECT ALL CABLES AND TUBING FROM THE ANALYZER BEFORE
MOVING IT.
Analog Input and USB port
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
64B Also can be used for logging these signals in the analyzer’s internal DAS
Current Loop Analog
Outputs
Adds isolated, voltage-to-current conversion circuitry to the analyzer’s analog
outputs.
41
Can be configured for any output range between 0 and 20 mA.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
Parts Kits Spare parts and expendables
42A
Expendables Kit for analyzer includes a recommended set of expendables for one
year of operation.
43
Expendables Kit for Internal Zero/Span, one year of operation.
Calibration Valves
Used to control the flow of calibration gases generated from external sources,
rather than manually switching the rear panel pneumatic connections.
50A
AMBIENT ZERO AND AMBIENT SPAN VALVES
Zero Air and Span Gas input supplied at ambient pressure.
Gases controlled by 2 internal valves; SAMPLE/CAL & ZERO/SPAN.
50B
AMBIENT ZERO AND PRESSURIZED SPAN VALVES
Zero Air supplied at ambient pressure. Span gas supplied from pressurized bottle of cal gas.
07272B DCN6552