Filter
Top Products
Troubleshooting and Service Teledyne API Model T360/T360M Operation Manual
258
7
8
9
10
Figure 8-11: Opening the GFC Wheel Housing
7. Remove the two (2) screws holding the opto-pickup printed circuit assembly
to the GFC wheel housing.
8. Carefully remove the opto-pickup printed circuit assembly.
9. Remove the four (4) screws holding the GFC wheel motor/heat sink
assembly to the GFC wheel housing.
10. Carefully remove the GFC wheel motor/heat sink assembly from the GFC
wheel housing.
11. Remove the one (1) screw fastening the GFC wheel/mask assembly to the
GFC motor hub.
11
12
Figure 8-12: Removing the GFC Wheel
12. Remove the GFC wheel/mask assembly.
13. Follow the previous steps in reverse order to put the GFC wheel/motor
assembly back together.
07272B DCN6552