Filter
Top Products
Getting Started Teledyne API Model T360/T360M Operation Manual
28
Figure 3-2: Display Screen and Touch Control
CAUTION – Avoid Damaging Touchscreen
Do not use hard-surfaced instruments such as pens to operate the
touchscreen.
The front panel liquid crystal display includes touch control. Upon analyzer start-
up, the display shows a splash screen and other initialization indicators before the
main display appears, similar to Figure 3-2 above (may or may not display a Fault
alarm
). The LEDs on the display screen indicate the Sample, Calibration and
Fault states; also on the screen is the gas concentration field (Conc), which
displays real-time readouts for the primary gas and for the secondary gas if
installed. The display screen also shows which mode the analyzer is currently in
(Mode field), as well as messages and data (Param field). Along the bottom of the
screen is a row of touch control buttons; only those that are currently applicable
will have a label. Table 3-1 provides detailed information for each com
ponent of
the screen.
07272B DCN6552