Filter
Top Products
3 - 7
3 COMMON PARAMETERS
(c) Base settings
Set the total number of bases and number of slots in each base identically
between Base Settings (Motion CPU setting) in SW6RN-GSV
P and I/O
Assignment Settings (PLC CPU setting) in GX Developer. In GX Developer,
the detailed settings may be omitted by setting the base mode "Automatic".
Total number of bases
and number of slots in
each base
• I/O Assignment Settings (PLC CPU setting) in GX Developer
• Base Settings (Motion CPU setting) in SW6RN-GSV P
(Note) : Only the Motion CPU
may be set without
setting the PLC CPU.