Filter
Top Products
4 - 37
4 AUXILIARY AND APPLIED FUNCTIONS
(4) Network configuration which MELSECNET/10(H), Ethernet, CC-Link, RS-422/485
were mixed
(a) When the MELSECNET/10(H) or Ethernet is defined as "Network" and CC-
Link or RS-422/485 is defined as "Link", combination of whether to be able
to access from the programming software (GX Developer, SW6RN-GSV
P,
etc.) is shown below.
Network communications
Usable/
unusable
Programming software CPU (C24) Network Link CPU
Programming software CPU (C24) Link Network CPU
Programming software Network Link CPU
Programming software Link Network CPU
Programming software CPU (C24) Network Link Network CPU
Programming software CPU (C24) Link Network Link CPU
Programming software Network Link Network CPU
Programming software Link Network Link CPU
: Usable : Unusable
(b) It can be accessed to 8 network points by setting the routing parameter in
the "Network".
(c) Because routing cannot access, it can access only the connected network.
The connected network can be selected by specifying the I/O No. of the
module.
Q173H
CPU
Qn(H)
CPU
MNET
or
Ether
MNET
or
Ether
RS-422/485
Personal
computer
USB/
RS-232
Personal
computer
USB
Personal
computer
RS-232
Q173H
CPU
Qn(H)
CPU
C24
MNET
or
Ether
Q173H
CPU
Qn(H)
CPU
MNET
or
Ether
CC-
Link
Q173H
CPU
Qn(H)
CPU
CC-
Link
MNET
or
Ether
CC-
Link
MNET
or
Ether
Q173H
CPU
Qn(H)
CPU
Q173H
CPU
Qn(H)
CPU
MNET
or
Ether
Personal
computer
MNET board or
Ether
Network No.1
Network
No.2
Q173H
CPU
Qn(H)
CPU
CC-
Link
Network No.5
Network No.4
RS-422/485
Q173H
CPU
Qn(H)
CPU
C24
MNET
or
Ether
Network No.3
Q173H
CPU
Qn(H)
CPU
MNET
or
Ether
MNET
or
Ether
Q173H
CPU
Qn(H)
CPU
MNET
or
Ether
C24
RS-422/485
: Communication is possible
: Communication is possible (Setting of the routing parameter is necessary.)
: Communication is impossible
<Example 1>
C24 : Serial communication module
MNET : MELSECNET/10(H)
Ether : Ethernet