Filter
Top Products
3 - 6
3 COMMON PARAMETERS
(b) Motion slot settings
Set the modules controlled by the self CPU by the Motion Slot Settings
(Motion CPU setting) in SW6RN-GSV
P. In GX Developer, set the slot for
Motion CPU control as the CPU number of the Motion CPU in I/O
Assignment Settings (PLC CPU setting).
Control CPU No.
• I/O Assignment Setting (PLC CPU setting) in GX Developer
• Motion Slot Setting (Motion CPU setting) in SW6RN-GSV P
(Note): Motion slot setting items are different depending on the operating system software.