Filter
Top Products
2 - 34
2 MULTIPLE CPU SYSTEM
•
Automatic refresh setting 3
PLC CPU (CPU No.1) Motion CPU (CPU No.2)
Send range for each CPU CPU side device Send range for each CPU CPU side device
CPU share memory G Dev. starting M0 CPU share memory G Dev. starting *
CPU
Point Start End Start End
CPU
Point Start End Start End
No.1 20 M1824 M2143 No.1 20 M4400 M4719
No.2 20 M2144 M2463 No.2 20 M4000 M4319
No.3 No.3
No.4
No.4
•
Automatic refresh setting 4
PLC CPU (CPU No.1) Motion CPU (CPU No.2)
Send range for each CPU CPU side device Send range for each CPU CPU side device
CPU share memory G Dev. starting D0 CPU share memory G Dev. starting *
CPU
Point Start End Start End
CPU
Point Start End Start End
No.1 96 D758 D853 No.1 96 D1536 D1631
No.2 778 D854 D1631 No.2 778 D758 D1535
No.3 No.3
No.4
No.4
POINT
Although it has set up so that 32 axes may be assigned in the above assignment
example, reduce the number of assignment automatic refresh points a part for the
number of axes to be used.