Filter
Top Products
A
BOUT
T
HIS
G
UIDE
The
CoreBuilder
TM
7000 Family ATM Switches Installation and Startup
Guide
provides all the information you need for installing and powering
up the CoreBuilder 7000 family ATM switch in ATM networking
environments.
This guide is intended for the system administrator, network equipment
technician, or network manager who is responsible for installing and
managing network hardware such as the CoreBuilder 7000 family ATM
switch. It assumes a working knowledge of network operations and
familiarity with communications protocols that are used in networks. No
prior knowledge of 3Com’s CoreBuilder 7000 networking equipment is
necessary to understand this manual.
If the information in the release notes that are shipped with this product
differs from the information in this guide, follow the instructions in the
release notes.
Finding Specific
Information in
This Guide
This table shows the location of specific information in this guide:
Table 1
Information in this Guide
If you are looking for Turn to
An overview of the CoreBuilder 7000 family ATM switch and
components
Chapter 1
Instructions for unpacking the CoreBuilder 7000 family ATM
switch
Chapter 2
Information about installing your CoreBuilder 7000 family ATM
switch
Chapter 3
How to install and hot swap modules and cards and connect
cables
Chapter 4
The system power-up procedure and initial system checks Chapter 5
How to configure the CoreBuilder 7000 family ATM switch Chapter 6