Filter
Top Products
6-30
C
HAPTER
6: C
ONFIGURING
THE
C
ORE
B
UILDER
7000 F
AMILY
ATM S
WITCH
Batch
Downgrade
Utilities
A batch utility is also provided to let you downgrade your system from
version 4.0 to the previous version 3.5. The name of the batch file is:
V_35back.bat
Running a Batch File To run a batch file (.bat) on your CoreBuilder 7000 family ATM switch, do
the following:
1 Perform the menu item:
(1) SYS \(3) LOA \(3) LCL \ 1
2 Reboot the CoreBuilder 7000 family ATM switch.
3 Connect your PC to the Service Port of the CoreBuilder 7000 family ATM
switch.
4 In the PC, change the directory to the one containing the appropriate
files.
5 Run the appropriate batch file from Table 6-5:
a Type the name of the batch file
b Type the appropriate ComPort switch (com1/com2)
c Type the appropriate Speed switch (19200/57600/115200)
Download all configuration parameters groups from
PC file to the switch engine flash memory
cfg_down.bat
Upload a configuration parameter group from the
switch engine flash memory to PC file
grp_upld.bat
Download a configuration parameter group from the
PC to the switch engine flash memory
grp_down.bat
Erase a configuration parameter group in the switch
engine flash memory
grperase.bat
Set debug flag to ON dbgon.bat
Set debug flag to OFF dbgoff.bat
Download all software executable files to the flash
memory
down_all.bat
Download all SW executables except atmsw.fls downpart.bat
Download only atmsw.fls downmain.bat
Download all software executable files to the flash
memory and erase the configuration in flash memory
downoper.bat
Table 6-5
Utilities for Upload/Download
Utility Batch file name