A-2 A
PPENDIX
A: C
ORE
B
UILDER
TM
7000 F
AMILY
ATM S
WITCH
S
PECIFICATIONS
Power Supply
AC Line Frequency
47 to 63 Hz
Input Voltage Options
110/220 Volt Auto selectable
Current Rating
5/2.8 amps typical
Redundancy (optional)
dual power supplies
Standards supported SNMP
MIB II (RFC 1213)
AToM MIB (RFC 1695)
AToM 2 (Circuit Statistics)
SONET MIB
Private chassis MIB
ATM
Signalling - UNI 3.0/3.1/4.0
ILMI - UNI 3.0/3.1/4.0
PNNI - IISP
LE 1.0
CoreBuilder Management
and Interface LEDs
Switch Module
PWR - Power indication (Green)
FAIL - Module fail indication (Red)
ACT - Activity, module active and running (Yellow)
10BASE-T status - Ethernet port status (Green)
Service port status - RS-232 (Green)
Control port status - RS-232 (Green)
Interface Card
PWR
FAIL
ACT
LINK STATUS - per port physical layer status (Green)
FAIL - per port interface status (Red)
ACT - per port traffic activity (Yellow)