Filter
Top Products
6
C
ONFIGURING
THE
C
ORE
B
UILDER
7000 F
AMILY
AT M
S
WITCH
This chapter describes the initial configuration of the CoreBuilder
TM
7000
family ATM switch. Using the terminal connected to the control port, you
log into the system and assign network addresses to the CoreBuilder
7000 family ATM switch. This enables the management of the site to
recognize and communicate with the CoreBuilder 7000 family ATM
switch. You also specify ATM connections between addresses, using the
ATM protocol you have selected.
The topics covered in this chapter include:
Logging in to the LMA
Integrated Fast Setup
Additional Switch Configuration
Viewing Network Statistics.
Storing and Retrieving Configuration Parameters
Loading Software and Configuration Data by Batch Utilities