Filter
Top Products
Loading Software and Configuration Data by Batch Utilities
6-29
(1) SYS:\ (3) LOA: \(1) STS
The download status is displayed as follows:
Load process completed successfully.
The status will be success only if all the files were successfully loaded. In
case of failure to load a file, the “load all” process will be stopped
without continuing to the next file, a failure indication is displayed, and
the display status option will display the error message:
General Error occurred while loading
Loading Software
and Configuration
Data by Batch
Utilities
This section describes an alternative to the method of the previous
section: RS-232 batch-file utilities you can use to download and upload
the executable software and the system configuration parameters for the
CoreBuilder 7000 family ATM switch to an external disk via the RS-232
service port. It contains the following topics:
Batch Upload/Download Utilities
Batch Downgrade Utilities
Running a Batch File
Returning to Operational Mode
This ability allows you to easily restore the configuration to a switch
which has failed or to configure a new switch with a standard
configuration stored on disk.
The utility is performed by running the appropriate batch file via the
RS-232 service port.
Batch
Upload/Download
Utilities
Table 6-5 shows the utilities and the batch file names.
Table 6-5
Utilities for Upload/Download
Utility Batch file name
General flash utility fls_utl.bat
Format all configuration parameters groups in flash
memory according to the mapping of version 4.0
cfgfrmat.bat
Upload all configuration parameters groups from the
switch engine flash memory to PC file
cfg_upld.bat