Filter
Top Products
Chapter 6 Tutorials
MGS3700-12C User’s Guide
86
Private VLAN to do port isolation in a VLAN instead of assigning each port to a
separate VLAN and creating a different IP routing domain for each individual port.
In this example, you put ports 2 to 5 in VLAN 123 and create a private VLAN rule
for VLAN 123 to block traffic between ports 2, 3 and 4.
6.6.1 Creating a VLAN
Follow the steps below to configure port 2, 3, 4 and 5 as a member of VLAN 123.
1 Access the web configurator through the Switch’s management port.
2 Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click
Apply to save the settings to the run-time memory.
3 Click Advanced Application > VLAN > Static VLAN.
Internet