Filter
Top Products
Chapter 5 Initial Setup Example
MGS3700-12C User’s Guide
59
In the example network, configure 2 as the port VID on port 1 so that any
untagged frames received on that port get sent to VLAN 2.
Figure 23 Initial Setup Network Example: Port VID
1 Click Advanced Applications
> VLAN in the navigation panel.
Then click the VLAN Port
Setting link.
2 Enter 2 in the PVID field for
port 1 and click Apply to save
your changes back to the run-
time memory. Settings in the
run-time memory are lost when
the Switch’s power is turned off.