Filter
Top Products
Chapter 37 DHCP
MGS3700-12C User’s Guide
353
together with the DHCP requests to the DHCP server. This allows the DHCP server
to assign the appropriate IP address according to the VLAN ID.
Figure 180 DHCP Relay Configuration Example
37.4 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the
DHCP clients. Click IP Application > DHCP in the navigation panel, then click the
VLAN link In the DHCP Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch.
See Section 8.6 on page 108 for information on how to set up management IP
addresses for VLANs.
Figure 181 IP Application > DHCP > VLAN