Filter
Top Products
Chapter 8 Basic Setting
MGS3700-12C User’s Guide
102
8.3 General Setup
Use this screen to configure general settings such as the system name and time.
Click Basic Setting > General Setup in the navigation panel to display the
screen as shown.
Figure 42 Basic Setting > General Setup
The following table describes the labels in this screen.
Status Normal indicates that the voltage is within an acceptable operating range
at this point; otherwise Error is displayed.
Table 9 Basic Setting > System Info (continued)
LABEL DESCRIPTION
Table 10 Basic Setting > General Setup
LABEL DESCRIPTION
System Name Choose a descriptive name for identification purposes. This name
consists of up to 64 printable characters; spaces are allowed.
Location Enter the geographic location of your Switch. You can use up to 32
printable ASCII characters; spaces are allowed.
Contact
Person's Name
Enter the name of the person in charge of this Switch. You can use up to
32 printable ASCII characters; spaces are allowed.