Chapter 16 Mirroring
MGS3700-12C User’s Guide
179
Figure 82 Advanced Application > Mirroring> RMirror
Thefollowingtabledescribesthelabelsinthisscreen.
16.2.3 Source
It will mirror port traffic to intermediate switch or destination switch by RMirror
VLAN. In different scenario of source switch, the configuration is different.
Click Advanced Application > Mirroring > RMirror > Source on the up right
of the navigation panel to display the screen shown. See the Table 39 on page 180
for more information on Source switch.
Table 38 Advanced Application > Mirroring> RMirror
LABEL DESCRIPTION
Active EnableRMirror
RMirrorVLANID EnteraRMirrorVLANIDtocreateaRMirrorVLAN
Apply ClickApplytosaveyourchangestotheSwitch'srun‐time
memory.TheSwitchlosesthesechangesifitisturnedof for
losespower,sousetheSavelinkonthetopnavigationpanel
tosaveyourchangestothenon‐volati lememorywhenyou
aredoneconfiguring.
Cancel ClickCanceltobeginconfiguringthisscreenafresh.
VLAN ThisfielddisplaystheVLANID
Active ThisfielddisplaystheRMirror
Delete TodeleteaRMirrorVLAN(s),selecttherule(s)thatyouwant
toremoveintheDeletecolumn,thenclicktheDelete
button.
Cancel ClickCanceltocleartheDeletecheckboxes.