Chapter 34 Green Ethernet
MGS3700-12C User’s Guide
332
34.2 Configuring Green Ethernet
Click Advanced Application > Green Ethernet in the navigation panel to display
the screen as shown.
Figure 167 Advanced Application > Green Ethernet
The following table describes the labels in this screen.
Table 112 Advanced Application > Green Ethernet
LABEL DESCRIPTION
Auto Power
Down
Select this option to enable Auto Power Down on the Switch.
Port This field displays a port number.
* Use this row to make the setting the same for all ports. Use this row first
and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as
you make them.
Auto Power
Down
Select this check box to enable Auto Power Down on this port.
Auto Power Down-
Auto Power Down is designed to save power when the port is
link down. It disables almost all functions of PHY in link down
state. Recovery from this mode to normal mode without frames
lost.
Clear this check box to disable the Auto Power Down feature on the port.