Filter
Top Products
Chapter 24 Multicast
MGS3700-12C User’s Guide
253
24.8.1 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the
Switch belong to VLAN 1. In addition, port 7 belongs to the multicast group with
VID 200 to receive multicast traffic (the News and Movie channels) from the
remote streaming media server, S. Computers A, B and C in VLAN are able to
receive the traffic.
Figure 119 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast group in the MVR
screen and set the receiver and source ports.
Figure 120 MVR Configuration Example
End Address This field displays the ending IP address of the multicast group.
Delete Select Delete Group and click Delete to remove the selected entry(ies)
from the table.
Cancel Select Cancel to clear the checkbox(es) in the table.
Table 71 Advanced Application > Multicast > Multicast Setting > MVR: Group
Configuration
LABEL DESCRIPTION