Filter
Top Products
Chapter 47 Product Specifications
MGS3700-12C User’s Guide
427
47.1 Fan Module Removal and Installation
This section describes how to change a fan module on the Switch.
The hot-swappable fan module is at the left on the Switch’s front panel. Perform
the following procedure to remove the fan module in order to change a fan fuse or
the fan module.
1 Loosen the thumbscrew on the front of the fan module.
2 Slide out the fan module.
3 Replace the fuse if it is burnt out. If the fuse is not the problem, use a different fan
module from the manufacturer.
4 Slide the fan module back into the fan module slot.
5 Tighten the thumbscrew.