Filter
Top Products
Chapter 6 Tutorials
MGS3700-12C User’s Guide
81
6.5.1 Creating a Guest VLAN
Follow the steps below to configure port 1, 2, 3 and 10 as a member of VLAN 200.
1 Access the web configurator through the Switch’s management port.
2 Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click
Apply to save the settings to the run-time memory.
3 Click Advanced Application > VLAN > Static VLAN.
4 In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 200
for example) in the Name field and enter 200 in the VLAN Group ID field.
5 Select Fixed to configure ports 1, 2, 3 and 10 to be permanent members of this
VLAN.
6 Clear the TX Tagging check box to set the Switch to remove VLAN tags before
sending frames out of these ports.