Filter
Top Products
Chapter 7 System Status and Port Statistics
MGS3700-12C User’s Guide
97
Name This field displays the name of the port.
Link This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps
or 1000M for 1000Mbps) and the duplex (F for full duplex or H for half
duplex). It also shows the cable type (Copper or Fiber).
Status If STP (Spanning Tree Protocol) is enabled, this field displays the STP state
of the port (see Section 13.1 on page 147 for more information).
If STP is disabled, this field displays FORWARDING if the link is up,
otherwise, it displays STOP.
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
RxPkts This field shows the number of received frames on this port
TxBytes This field shows the number of transmitted frames on this port
RxBytes This field shows the number of received frames on this port
Errors This field shows the number of received errors on this port.
HOL
Drops
This field shows the number of packets destined to the CPU.
BW
Exceede
d
This field shows the number of packets exceeded bandwidth.
TrTcM
Drops
This field shows the number of packets destined to Two Rate Three Color
Marker.
Tx KB/s This field shows the number kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time the connection has been up.
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packet This field shows the number of good packets (unicast, multicast and
broadcast) transmitted.
Multicast This field shows the number of good multicast packets transmitted.
Broadcas
t
This field shows the number of good broadcast packets transmitted.
Pause This field shows the number of 802.3x Pause packets transmitted.
Tagged This field shows the number of packets with VLAN tags transmitted.
Rx Packet
The following fields display detailed information about packets received.
RX
Packet
This field shows the number of good packets (unicast, multicast and
broadcast) received.
Multicast This field shows the number of good multicast packets received.
Broadcas
t
This field shows the number of good broadcast packets received.
Pause This field shows the number of 802.3x Pause packets received.
Table 8 Status: Port Details (continued)
LABEL DESCRIPTION