Filter
Top Products
Chapter 16 Mirroring
MGS3700-12C User’s Guide
182
Figure 84 Advanced Application > Mirroring> RMirror > Destination
The following table describes the labels in this screen.
Table 40 Advanced Application > Mirroring> RMirror > Destination
LABEL DESCRIPTION
RMirror VLAN Select a RMirror VLAN ID (that you configured in the RMirror
screen) from the drop-down list box.
Monitor Port Enter a port number to create a monitor-port
Apply Click Apply to save your changes to the Switch's run-time
memory. The Switch loses these changes if it is turned off or loses
power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
VLAN This field displays the VLAN ID
Monitor Port This field displays the monitor-port number.
Tagging This field displays the traffic form monitor-port is tagged with
RMirror VLAN or not.
Delete Select Delete RMirror VLAN and click Delete to remove the
selected entry(ies) from the table.
Cancel Select Cancel to clear the checkbox(es) in the table.