Filter
Top Products
Chapter 4 The Web Configurator
MGS3700-12C User’s Guide
51
Queuing
Method
This link takes you to a screen where you can configure queuing with
associated queue weights for each port.
VLAN Stacking This link takes you to screens where you can configure VLAN stacking
which helps to distinguish multiple customers VLANs.
Multicast This link takes you to screens where you can configure various multicast
features, IGMP snooping and create multicast VLANs.
AAA This link takes you to a screen where you can configure authentication,
authorization and accounting services via external servers. The external
servers can be either RADIUS (Remote Authentication Dial-In User
Service) or TACACS+ (Terminal Access Controller Access-Control System
Plus).
IP Source
Guard
This link takes you to screens where you can configure filtering of
unauthorized DHCP and ARP packets in your network.
Loop Guard This link takes you to a screen where you can configure protection
against network loops that occur on the edge of your network.
VLAN Mapping This link takes you to screens where you can configure VLAN mapping
settings on the Switch.
Layer 2
Protocol
Tunneling
This link takes you to a screen where you can configure L2PT (Layer 2
Protocol Tunneling) settings on the Switch.
sFlow This link takes you to screens where you can configure sFlow settings on
the Switch. This feature is used to monitor traffic in switched networks.
Errdisable This link takes you to a screen where you can configure the Switch to
limit specific traffic, to shut down a port because of specific reasons and
activate the port automatically for preconfigured criteria.
PPPoE This link takes you to a screen where you can configure PPPoE
Intermediate Agent settings on the Switch.
Private VLAN This link takes you to a screen where you can block traffic between ports
in a VLAN on the Switch.
Green
Ethernet
This link takes you to a screen where you can configure Green Ethernet
power saving settings on the Switch.
IP Application
Static Routing This link takes you to a screen where you can configure static routes. A
static route defines how the Switch should forward traffic by configuring
the TCP/IP parameters manually.
DiffServ This link takes you to screens where you can enable DiffServ, configure
Two Rate Three Color Marker settings and set DSCP-to-IEEE802.1p
mappings.
DHCP This link takes you to screens where you can configure the DHCP
settings.
Management
Maintenance This link takes you to screens where you can perform firmware and
configuration file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login
password and configure SNMP and remote management.
Table 4 Navigation Panel Links (continued)
LINK DESCRIPTION