Filter
Top Products
Chapter 4 The Web Configurator
MGS3700-12C User’s Guide
52
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default
administrator password. Click Management > Access Control > Logins to
display the next screen.
Figure 19 Change Administrator Login Password
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click Apply to save your
changes back to the run-time memory. Settings in the run-time memory are lost
when the Switch’s power is turned off.
Diagnostic This link takes you to a screen where you can view system logs and test
port(s).
Syslog This link takes you to screens where you can setup system logs and a
system log server.
Cluster
Management
This link takes you to screens where you can configure clustering
management and view its status.
MAC Table This link takes you to a screen where you can view the MAC addresses
(and types) of devices attached to what ports and VLAN IDs.
ARP Table This link takes you to a screen where you can view the MAC addresses –
IP address resolution table.
Configure
Clone
This link takes you to a screen where you can copy attributes of one port
to other ports.
Table 4 Navigation Panel Links (continued)
LINK DESCRIPTION