Filter
Top Products
Chapter 14 Bandwidth Control
MGS3700-12C User’s Guide
171
Active Select this check box to activate peak rate limits on this port.
Peak
Rate
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the incoming traffic flow on a port.
Peak
Burst
Specify the maximum number of bytes of unused peak bandwidth capacity
that can be accumulated.
Active Select this check box to activate egress rate limits on this port.
Egress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the out-going traffic flow on a port.
Egress
Burst
Specify the number of bits allowed to be sent per interval (Tc) to conform
with the target-rate (CIR) per second.
Apply Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields.
Table 34 Advanced Application > Bandwidth Control (continued)
LABEL DESCRIPTION