Filter
Top Products
Chapter 15 Broadcast Storm Control
MGS3700-12C User’s Guide
174
The following table describes the labels in this screen.
Table 35 Advanced Application > Broadcast Storm Control
LABEL DESCRIPTION
Active Select this check box to enable traffic storm control on the Switch. Clear
this check box to disable this feature.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all
ports. Use this row first to set the common settings and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Broadcast
(pkt/s)
Select this option and specify how many broadcast packets the port
receives per second.
Multicast (pkt/
s)
Select this option and specify how many multicast packets the port
receives per second.
DLF (pkt/s) Select this option and specify how many destination lookup failure (DLF)
packets the port receives per second.
Apply Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields.