Filter
Top Products
96 APPENDIX B: CHOOSING A SOFTWARE PACKAGE
SuperStack II
NETBuilder Upgrade
Migration Path
Table 8 outlines the recommended migration path from prior version
software packages to the latest packages supported in version 11.3. Use this table
to identify the new software package that is most similar to the package you are
currently using.
Packages are identified by the two-letter designator of the version string, which is
found on your product diskette label.
You can also identify the package using:
bcmuname -R <device>
Where <device> is the IP address or hostname of the system you are planning to
upgrade. Or enter the Enterprise OS user interface command:
SHow -SYS VERsion
From Version 11.0 To Version 11.3
AC (DPE) AC (DPE)
DW (DPE) DW (DPE)
DE (DPE) DE (DPE) or DS (DPE) The DE package has all the features of DW plus 56-bit
encryption. The DS package has all the features of
DW plus 128-bit encryption.
From Version 11.1 To Version 11.3
AC (DPE) AC (DPE)
DW (DPE) DW (DPE)
DE (DPE) DE (DPE) or DS (DPE) The DE package has all the features of DW plus 56-bit
encryption. The DS package has all the features of
DW plus 128-bit encryption.
From Version 11.2 To Version 11.3
AC (DPE) AC (DPE)
DW (DPE) DW (DPE)
DE (DPE) DE (DPE) or DS (DPE) The DE package has all the features of DW plus 56-bit
encryption. The DS package has all the features of
DW plus 128-bit encryption.
Table 7 NETBuilder II Software Package Migration to 11.3
Recommended Upgrade Notes