Filter
Top Products
Installing the Utilities on a UNIX System 15
■ If you download the utilities to your hard disk (see Chapter 8 for information
about downloading the utilities):
a Decompress the utilities.
b Change to the utilities directory on your hard disk using:
cd /<path>/
3 Run the setup program.
■ To install all packages from the CD-ROM, including the utilities and package
definitions for use with Transcend, enter:
./bcmsetup all
■ To install only the upgrade utilities, enter:
./bcmsetup bcm
The utilities are installed in the default directory /usr/3Com/bcm/.
If you are working in an HP-UX operating system, the bcmsetup command must
be uppercase, that is, BCMSETUP. The options that follow remain lowercase.
4 Complete the following step for your UNIX shell:
■ For a C-shell installation, add the contents of the following file to the .cshrc file
for each user you want to have access to the utilities, including root:
/usr/3Com/common/data/.login-bcm
Or you can enter the path after every logon:
source /usr/3Com/common/data/.login-bcm
■ For a Bourne shell installation, add the contents of the following file to the
.profile file for each user you want to have access to the utilities, including root:
/usr/3Com/common/data/.profile-bcm
Or you can enter the path after every logon:
. /usr/3Com/common/data/.profile-bcm
5 Return to normal privilege by entering:
exit
6 Use the bcmdiagnose utility to ensure that your installation is correct by entering:
bcmdiagnose
Table 1 UNIX Directories
Operating System Directory Name
Solaris 2.5.x sunos5
HP-UX 10.x HP_UX
IBM AIX 4.1.x, 4.2x aix