Filter
Top Products
86 APPENDIX A: TROUBLESHOOTING
The required file(s) <ipaddress>:<drive>:/<config file path> could not be
located.
Meaning: The bcmtest utility was unable to verify the presence of a file or
directory.
Action: Make sure that the required files and directories are available to the
bcmtest utility.
Return Codes from
bcmdiagnose
The bcmdiagnose utility can display the following exit return codes:
Table 6 bcmdiagnose Return Codes
Code Meaning
0 The operation was successful.
1 A command line parsing error occurred.
2 A command line argument is invalid.
3 A installation error occurred.
4 A Enterprise OS Upgrade Management utility failed.
5 The device is not responding.
6 Internal parsing error.
7 A UNIX command failed.
8 The device configuration is incompatible with the operation.
9 The attempted operation is unsafe.
10 No arguments in a function call.
11 No sys file was found.
12 The boot image was not found.
13 The boot image is bad.
14 The module upgrade failed.
15 The module failed to reboot.
16 The boot image is not set.
17 Missing device address (DNS name or IP address).
18 The Enterprise OS software is not installed.
19 Error installing a Enterprise OS SW or FW package.
20 An error occurred during a UNIX file copy.
21 Enterprise OS software installation not performed.
22 Failed to perform a software upgrade.
22 Failed to perform firmware upgrade.
23 Test-Boot and/or reboot timed-out.
24 The Upgrade of the device and image is not supported.
25 A critical file was missing or corrupted in a file transfer.