Filter
Top Products
2
INSTALLING THE UTILITIES ON A
N
ETWORK MANAGEMENT STATION
Before you start the upgrade process, you must install the Enterprise OS Upgrade
Management Utilities on a network management station (NMS). If you are using
Transcend Enterprise Manager or Transcend Network Control Services, which has
the utilities bundled, you should install the latest utilities to take advantage of new
features and version support.
This chapter describes how to install the Enterprise OS Upgrade Management
Utilities on the following platforms:
■ Solaris 2.x
■ HP-UX 10.x
■ IBM AIX 4.x or later
■ Windows NT 4.x
■ Windows 95/98
Installing the Utilities
on a Windows System
You can install the utilities from a CD-ROM or from utilities that you have
downloaded to your hard disk. To install the utilities on a Windows system, follow
these steps:
1 If you have installed utilities before or have Transcend, check the version by
entering:
bcmdiagnose
If the version is earlier than 11.3, continue to the next step. If you already have
11.3, you do not need to reinstall the utilities.
2 Change to the utilities directory.
■ If you are using the CD-ROM:
a Insert the CD-ROM into the CD-ROM drive.
b Open a command window.
c Change to the CD-ROM directory.
For example, if E is the drive letter for the CD-ROM, enter:
E:
3 If you download the utilities to your hard disk (see Chapter 8 for information
about downloading the utilities):
a Decompress the utilities.
b Open a command window.
c Change to the utilities directory using:
<drive>:\<path>\