Filter
Top Products
28 CHAPTER 4: UPGRADING USING THE NETBUILDER UPGRADE LINK APPLICATION
Settings Page The Setting Page lets you establish basic settings.
■ You can choose the method of file transfers. TFTP is used by default for
NETBuilder bridge/router software release 11.0 and lower while FTP is used by
default for NETBuilder bridge/router software release 11.1 and higher and
Enterprise OS version 11.3.
■ Enter an SNMP read/write string and the NETBuilder bridge/router or
PathBuilder switch user name and password.
■ If -noAuthentication was not specified in Upgrade Link or on the bcmnbrus
command line, authentication will be used and you must enter the NETBuilder
or PathBuilder username and password.
■ If -noAuthentication was specified in Upgrade Link or on the bcmnbrus
command line, no authentication is required and any user name and password
entries are ignored.
■ If using FTP, enter the FTP client user name and password.
Abort Exits Upgrade Link and aborts the process. Some processes may need
to be completed even after clicking Abort. Upgrade Link displays a
message about any ongoing processes.
View Logs Opens a page listing the logs available for viewing.
Table 3 Status page Buttons (continued)
Button Description