Filter
Top Products
A
TROUBLESHOOTING
This appendix describes error codes and messages that may be displayed during
the upgrade process as a result of running the bcmdiagnose utility or when
network dependencies have not been met.
Getting Help For UNIX, to obtain help information about a utility, use:
<utility> -h
Help is available in HTML or (UNIX) man pages.
Man Pages On a UNIX system, access the man pages by entering:
man bcm-intro
To access the man pages for a specific utility, use:
man <NMU_name>
where <NMU_name> is the name of the upgrade utility.
HTML Help To access the HTML help, enter the following URL in your browser:
/usr/3Com/bcm/gui/hlp/bcm-intro.html
Or to access help for a specific utility, use:
/usr/3Com/bcm/gui/hlp/<NMU_name>.html
For more information about using the Enterprise OS Upgrade Management
Utilities, see Chapter 8.
General
Troubleshooting Error
Messages
The master boot block startup value is set to monitor. This is not a
supported value.
Meaning: The master boot block startup value is set to monitor.
Action: Make sure that your bcmconfig <ipaddr> master -startup value is set
to try boot once or try forever.
The primary boot block must access the boot file locally. That is, all files
must physically reside on the NETBuilder.
Meaning: The primary boot source is set to boot from the network.
Action: Set the primary boot source to local. Make sure the bcmconfig
<ipaddr> primary -bootdevice value is set to either localA or localB.