Filter
Top Products
Utility Descriptions and Syntax 81
bcmsetup
Syntax For UNIX:
bcmsetup <packages> [install_directory]
For Windows:
bcmsetup <drive:> [all | bcm | nat]
Description The bcmsetup utility places the latest version of the Enterprise OS Upgrade
Management Utilities on the network managment station. It also sets up the initial
package definitions for use by Transcend. You must be root to run the bcmsetup
utility.
Values
Options
Default For UNIX, unless an alternate installation directory is specified, the utilities are
installed in the /usr/3Com/bcm directory.
For Windows, the utilities are always installed in \usr\3Com\bcm.
bcmsysupgrade
Syntax bcmsysupgrade [options] <stage> <device>
Description The bcmsysupgrade utility is a master script that assists you in upgrading a
bridge/router to the latest version of software and/or firmware. The
bcmsysupgrade utility uses many of the other Enterprise OS Upgrade Utilities to
perform a complete upgrade of a bridge/router over the network.
Values
-new_hw Used to restore software to a new bridge/router or switch. Use
this option when a failed bridge/router or switch is exchanged for
a new one. After IP and SNMP connectivity is established, use this
option to copy the original software to the new bridge/router or
switch.
all Installs both the utilities and package definitions (bcm and
nat).
bcm Enterprise OS Upgrade Management Utilities.
nat Package definitions for use by Transcend.
[Install_directory]
UNIX only
Defines the directory where the utilities and other files set up
with bcmsetup are to be located.
<drive:> Identifies the target drive where the utilities and other files set
up with bcmsetup are to be located.
<stage>
-s:from_nb Downloads configuration files from the bridge/router.
-s:update Upgrades configuration files on the network
management station.
-s:to_nb Uploads configuration and image files to the
bridge/router.
-s:test_boot * Test boots the upgraded configuration.