Filter
Top Products
Using Upgrade Link 55
3 Select Upgrade and click Apply.
The Upgrade page appears.
4 Select a software package from the pop-up list. The list includes all packages you
have installed on the NMS for your platform. If your package is not listed, install
the software using the procedure in “Installing the Utilities on a Network
Management Station” on page 13.
CAUTION: If you select a NETBuilder bridge/router or PathBuilder switch software
package that includes encryption, a message regarding the license agreement
appears. To proceed with the installation you must accept this agreement.
The Upgrade window shows information about your system, including the flash
memory requirements for a manual or automatic recovery upgrade.
5 Click Next.
6 The recommended upgrade method is selected based on the amount of memory
you have installed. If you do not wish to perform a customized upgrade, go to
step 12.
CAUTION: If you override the Upgrade Link selection, your upgrade may fail.