Filter
Top Products
Restoring Software from a Backup 67
2 With the Manager parameter, create a new manager with read/write access to the
bridge/router. For security reasons, limit the number of network management
stations by entering the IP address of the network management station that will
have access. For example, enter:
ADD -SNMP Manager “sysadm” 129.213.224.1
Mapping Hostnames Using the etc/snmp.cfg File
/etc/snmp.cfg is used to configure a mapping between hostnames and/or IP
addresses and SNMP community strings. If the NETBuilder bridge/routeris
configured to accept a community string other than "public", you need to update
this file with the new community string. Follow the examples in the file when
adding your own entries.
The following is an example file showing how community strings are mapped to a
device.
#
# This file indicates which community strings are to be used
# with a particular device. Follow the examples below
# Timeout values are given in seconds.
#
# Name read write Timeout [Platform]
# foo public private 10 netbuilder
#
# [platform] is optional, and must be one of:
# netbuilder
# netbuilder2
# netbuilderro
# netbuilder+
# lanplex5004
# lanplex5012
# lanplex6004
# lanplex6004R4
# lanplex6012
# lanplex6012R4
# lanplex2500
# lanplex2016
# fms
# fmsII
# fmsbridge
# fmstp8i
# linkswitch
# linkswitch1000
# linkswitch2200
# linkswitch3000
# msh
# msh4bridge
# mshfddi
# mshlinkswitch
# mshtrbridge
# linkconverter
#
# Example:
# 192.0.10.4 private private 10