Filter
Top Products
20 CHAPTER 3: PLANNING AND PREPARING THE UPGRADE
Checking DRAM To check how much DRAM you have installed on the switch or bridge/router, on
the NMS use:
bcmuname -M <device>
Where <device> is the IP address or hostname of the switch or bridge/router.
Checking Flash Memory To check how much flash memory you have installed on the switch or
bridge/router, on the NMS use:
bcmdf <device>[:<drive:>]
Where <device> is the hostname or the IP address of the switch or bridge/router.
Specify drive A for NETBuilder II bridge/routers or PathBuilder switches.
Do not specify a drive for SuperStack II or OfficeConnect bridge/routers.
OfficeConnect NETBuilder:
(FD) - FRAD 120 8 MB 4 MB 4 MB
(NW) - IP/IPX/AT Router 112, 122, 132, 142 8 MB 4 MB 4 MB for 132
2 MB for all others
(BF) - Boundary Router 113, 123, 143 8 MB 8 MB 4 MB
(OF) - Multiprotocol Router 117, 127, 137, 147 12 MB 8 MB 4 MB
(AF) - APPN 116, 126, 146 12 MB 8 MB 4 MB
(NE) - IP/IPX/AT Router with 56-bit
Encryption
112, 122, 132, 142 8 MB 4 MB 4 MB for 132
2 MB for all others
(NS) - IP/IPX/AT Router with 128-bit
Encryption
112, 122, 132, 142 8 MB 4 MB 4 MB for 132
2 MB for all others
(VE) - VPN IP/IPX/AT Router with
Quick Step VPN and 56-bit
Encryption
115, 125, 135, 145 8 MB 8 MB 4 MB
(OE) - Multiprotocol Router with
56-bit Encryption
117, 127, 137, 147 12 MB 8 MB 4 MB
(OS) - Multiprotocol Router with
128-bit Encryption
117, 127, 137, 147 12 MB 8 MB 4 MB
(VW)- Multiprotocol Rou;r 147 12 MB 8 MB 4MB
PathBuilder S5xx Switch
(PW) - Multiprotocol Router S500, S580, S593,
S594
160 MB 16 MB 4 MB
(PE) - Multiprotocol Router with
56-bit Encryption
S500, S580, S593,
S594
160 MB 16 MB 4 MB
(PS) - Multiprotocol Router with
128-bit Encryption
S500, S580, S593,
S594
160 MB 16 MB 4 MB
Table 2 Version 11.2 Software Packages (continued)
Flash Memory Required for:
Software Package Model DRAM Required Automatic Recovery Manual Recovery